On our outdoor 6mm, 8mm, 10mm, 12mm, and 16mm SMDs & DIPs Full Color LED Displays we provide both these Warranties
The 8 Year Parts Warranty
Standard Manufacturers Parts Warranty
Under normal situations, the standard 8 year warranty covers the sign cabinet, and all necessary parts in the cabinet; such as LED modules, receiving card/control card, power supply, fans etc…
Any optional 3rd party parts are covered under those manufacturers parts warranty.
PLUS – The 8 Year Quality Warranty
What is this?
If any of the below happens; The LED Display gets replaced – and you get a new 8 year warranty.
They are borderless and are available in both front or rear access.
Outdoor LED Display
Grade – A Parts and Components
Full Color 10mm and 16mm Modules.
The PC Suite is a self-designed module. The housing and louver’s Module Components create create great viewing effect and provides high contrast. High quality Anti-UV material which offers high resistance to extreme weather (hot and cold) and dust, and are easy to change.
* Built-in thermostatically controlled cooling Fan
* Built-in constant current limiting circuit
* Energy efficient, high reliability
MeanWell Drivers are Superior in many ways:
* AC input range selectable by switch
* Protections: Short circuit / Overload / Over voltage / Over temperature
* Forced air cooling by built-in DC fan
* Withstand 300vac surge input for 5 seconds
* 100% full load burn-in test
* LED indicator for power on
* Fixed switching frequency at 90KHz
Superior ventilation using an ADDA fan, high velocity and longer life-span. Low noise, low power consumption, UL/CUL, TUL, and CE Approval.
High quality Epistar LED chips, 12 mil, bronze leg for the lamp. Higher quality LED chips can ensure LED lamp life-span and better quality. Bronze legs can be packed better and ensure better heat dissipation.
We offer a self R&D designed PCB drawing, which ensures that all modules and wire layout has been calculated more accurately. The cabling and drive method is more reliable and clean looking as well.
Consistent Current Drive IC. MBI5024 has 18V Voltage resistance, drive tolerance is 1.5% more reliable and stable for prolonged live spans.
Resistors with 1% Tolerance resistance. Ensures stable Voltage supply for LED, and makes a more accurate electric current.
Tantalum Capacitors. Stable quality and long life-span.
Pure Copper wiring is used throughout which conforms to international standards. Anti-oxidation capability and conductivity are better than non-standard wires. This provides easy sealing use, little resistance, and the power consumption of heat loss is lower.
0.8 mil gold-plating connector. Better Electrical connection, eliminates signal distortion, transmits with stability and reliability.
Single Sided Cabinets – Double Sided two Cabinets – and – Double Sided one Cabinet styles available.
Independently engineered designed aluminum or steel cabinets. For ease of installation and easy maintenance. Front or rear access available. All cabinets are powder coated black. Cabinets are IP65 Certified.
Power Connectors are Military grade AC power connectors which are CE qualified. The Connectors have silver plating for better contact performance, quick lock, IP65 Waterproof, and withstands high temperatures, SALT SPRAY 500H, specified electric current is 46A, and can work under high voltage of 1250V.
Neutrik from Switzerland Signal Connector. Easy cable connections for direct plug-in/out; good signal contact performance and stable signal transmission.
AMP Tyco Brand, CAT6 net Cable – Network Connector, Better quality bronze core cables, high anti-oxidation and a more stable transmission capability for high frequency signals.
Stainless Screws and hardware with hard coating for inside and out. Blue Zinc plating ensures anti-corrosion and rust prevention.
The Self-designed / Engineered designed Pin Hub board with Cowherd signal connector ensures winding displacement a solid connection and makes the LED Display have a stable LED performance.
Production and Quality Control
Hydraulic Pressure water jets simulate heavy rain conditions testing the resistance of the cabinets to a greater extent. Cabinets and modules are IP65 Certified.
Vibration Testing. Analog display simulates vibration that occurs during transportation, ensuring high quality performance once installed at your location.
In factory 120 hours full white aging and 12 hours video testing. We perform more demanding test conditions to ensure the operation for the life of your Display.
In factory testing provides more than 7 days with full load testing; fully guarantees the reliability and stability of all components.
We use the Chroma meter (CS100A) to do the white balance testing on LEDs. Brightness and color range endure rigorous testing to ensure compliance brightness and color uniformity. Color temperature requirements meet D65.
Both the doors and the main frame are Grounded. This ensures complete product grounding. In case of lightning the grounding directs the current into the earth in time to ensure the safety of the Display. Earth grounding during installation is mandatory as well.
** Conventional thinking is that 10,000 nits is what the nits brightness should be. However it has been proven that 8,000 nits is more than bright enough in direct sunlight, plus has the advantage of not causing the LED’s to degenerate at a faster pace, overwork the LED Drivers, or cause unneeded overheating. Thus making it a better long lasting LED Display product.
In addition, it makes the LED Display more energy efficient.
If you have any questions, please do not hesitate to contact us.
Or if you are not sure what you just looked at, or would like to understand the importance of using the high quality parts and components we use, please sign up for the webinar!